毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

多通道干涉测向技术研究+文献综述

时间:2017-02-16 16:56来源:毕业论文
论文分析比较了这几种经典算法在非理想情况下的测向性能,其中主要考虑了基线位置误差、通道幅相不一致误差、来波频率估计误差、其它辐射源影响等几种非理想情况,并以此建立

本文主要研究了一文线性干涉仪测向方法及其解模糊方法。本文分析单基线相位干涉仪中存在测向模糊与测向精度之间的矛盾的原因,研究了几种经典的解模糊方法,包括长短基线测向法、双基线余数定理测向法和基于模转换测向方法。
本论文还分析比较了这几种经典算法在非理想情况下的测向性能,其中主要考虑了基线位置误差、通道幅相不一致误差、来波频率估计误差、其它辐射源影响等几种非理想情况,并以此建立相应的误差模型,最后进行相应的误差分析。
另外,本文基于雷达辐射源测向试验验证了基于模转换测向算法的正确性。5946
关键词  干涉仪测向  解模糊  误差分析  模转换
毕业设计说明书(论文)外文摘要
Title         Multiple-channel  Interferometer    Direction-of-arrival  Estimation  Technology                             

Abstract
This paper mainly studies the one-dimensional linear interferometer direction finding method and fuzzy method. This paper analyses single baseline phase interferometer direction finding DF accuracy existing in the fuzzy and the contradiction between the reasons, studies of several classic fuzzy solution methods, including length of baseline direction finding method, dual baseline remainder theorem direction finding method and based on the mode conversion direction finding method.
This paper also compared the several classical algorithm in non ideal condition performance of direction, which mainly considered the baseline position error, channel amplitude and phase error, consistent to the wave frequency estimation error, other sources of radiation effects of non ideal conditions, and to establish the corresponding error model, the corresponding error analysis.
In addition, based on the radar radiation source df test based on modulus conversion direction finding algorithm is correct.
Keywords  Mode Conversion   Error Analysis   Ambiguity Resolution
Interferometer Direction-finding
目   次

1绪论1
1.1 研究背景1
1.2 高精度测向的国内外研究现状1
1.3 本文研究内容和章节安排2
2相位干涉仪测向方法  4
2.1引言   4
2.2基于单基线相位干涉仪测向算法4
2.3 基于长短基线干涉仪测向算法6
2.4 基于双基线余数定理的测向算法7
2.5模转换干涉仪估计来波方向10
2.6本章小结 15
3干涉仪测向算法误差分析  16
3.1引言16
3.2 基于模转换测向算法误差分析 16
3.3基于长短基线测向算法误差分析  19
3.4 本章小结 20
4 外场实验和结果分析21
4.1引言21
4.2 二百米距离外场试验及其结果分析 21
4.3本章小结30
结论  31
致谢  32
参考文献33
 
 1  绪论
1.1  研究背景
相关干涉测向技术是在干涉仪测向技术上发展而成的。干涉仪测向系统利用测量接收天线之间的相位差确定来波方向。干涉仪测向天线孔径越大,即基线越长,测向精度越高。然而当基线长度大于半个波长时,相位测量就具有多值性,这就是长基线测向的模糊问题。在干涉仪设计中,利用多条基线来测量来波方向的范围,进而确定来波方向。干涉仪测向是利用多个天线接收的回波信号之间的相位差进行测角,具有较高的测向精度,在电子侦察中得到了广泛应用。
基于相位测量的干涉仪测向技术具有能被动测向、测向精度高、灵敏度高、速度快等优点,在电子对抗装备中应用十分广泛,如美国的AN/PR248A,AN/ALQ2125,ZS22000和以色列的RAS22“猫头鹰”等系统。 多通道干涉测向技术研究+文献综述:http://www.751com.cn/tongxin/lunwen_3063.html
------分隔线----------------------------
推荐内容