毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

基于simulink的三角波线性调频定距信号处理仿真

时间:2017-01-10 10:44来源:毕业论文
论文对三角波调频定距信号处理进行了理论上的研究,并从三角波信号开始到目标回波信号直到二者混频得到差频信号的过程进行了分析和推导,并据此给出可行的定距方案,通过Matl

摘要:三角波调频多普勒定距系统主要应用了线性三角波调频信号处理技术和多普勒信号处理等相关知识,具有良好的距离选择性以及抗回波噪声干扰性强等特点。
本篇论文对三角波调频定距信号处理进行了理论上的研究,并从三角波信号开始到目标回波信号直到二者混频得到差频信号的过程进行了分析和推导,并据此给出可行的定距方案,通过Matlab/Simulink软件平台进行整个定距系统模块化的构建以及给定具体数值的定距过程的仿真,验证所选定的定距方法的可行性目的。5156
 关键词:调频多普勒,三角波,差频信号,信号处理,Simulink仿真
Title    Fixed distance signal processing of triangle wave     FM based on Matlab/Simulink simulation                                              

AbstractThe theory and method of the triangle wave linear and sequential FM wave signal and the knowledge of the processing of the Doppler frequency signal are used in the fixed distance system of FM Doppler, which is good at choosing distance and capable of anti-interference. In this thesis, the fixed distance system of triangle wave FM Doppler is worked over. The process is particularly speculated and analyzed which is since the signal that is radiated until which is returned to a receiver associated with the system then output a different frequency signal by mixed these two signals. According to the analysis, the basic fixed distance scheme is proposed. Then the feasibility of the method of the fixed distance system is proved by the Matlab/Simulink simulation, which includes modeling the modules of the fixed distance system and simulating the process with the data already known.
Keywords :FM Doppler, the triangle wave, the difference frequency signal, signal processing, simulation
目  录    

1 绪论    1
1.1 选题的意义以及现实的背景    1
1.2 调频定距系统发展过程与国内外现状概述    2
1.3 仿真的必要性以及仿真软件平台简单介绍    3
1.4 论文工作以及各个章节主要内容    4
2 调频定距系统和调频多普勒定距系统原理    6
2.1 概述    6
2.2 调频定距系统原理    6
2.3 调频多普勒定距系统原理    10
2.4 系统各部分参数的选择    10
2.5 本章小结    14
3. 三角波调频多普勒定距系统设计及结果分析    15
3.1 概述    15
3.2  静态与动态目标的三角波调频定距理论分析与仿真    15
3.3 本章小结    29
结 论    30
致谢    32
参考文献:    33
1 绪论
1.1 选题的意义以及现实的背景
本次课题主要是研究三角波线性调频多普勒定距系统的信号处理技术,其定距主要应用线性调频连续波原理,通过信号处理的来获取目标的多普勒频率,从而获得目标的速度以及距离等相关有用信息。
调频测距是基于连续波信号处理技术的一种发射信号频率按调制信号规律变化的等幅连续波无线电定距方法。该调频系统发射信号的频率是时间的函数,在无线电信号从发射到遇到目标返回这段传播时间内,发射信号发生了变化,于是导致了回波信号频率与接收到回波信号频率不同。两者之间的差值的大小与系统到目标的距离有关,测定其频率差,便可得到系统到目标的距离。这种测距方法成为调频测距。当目标与系统间进行着相对运动时,在不同时刻返回的差值也将不同,此时根据多普勒效应,可以计算出频率差之间的多普勒频率关系,从而还可以获得目标的径向速度。 基于simulink的三角波线性调频定距信号处理仿真:http://www.751com.cn/tongxin/lunwen_2097.html
------分隔线----------------------------
推荐内容