毕业论文

打赏
当前位置: 毕业论文 > 电子通信 >

X波段发卡式带通滤波器设计

时间:2018-05-30 16:46来源:毕业论文
介绍了低通滤波器的原型,然后通过频率变换使其变为带通滤波器,并对变换后的电容电感利用公式做了定义,并对滤波器的设计提出了自己的想法。接着进入正题,“U”字型发卡式滤

摘要随着科技的进步和无线通信的蓬勃发展,人们对通信系统的要求日益增高,微波滤波器在通信系统中起着举足轻重的作用,可以说它是通信系统的基石。而性能卓越的滤波器充分利用频率资源、较好抑制带外信号的干扰、改善通信服务。本文首先介绍了低通滤波器的原型,然后通过频率变换使其变为带通滤波器,并对变换后的电容电感利用公式做了定义,并对滤波器的设计提出了自己的想法。接着进入正题,“U”字型发卡式滤波器是其基本模型,并分析了发卡式滤波器的四种电磁耦合特性,其耦合系数与距离与方式不同的变化。最后根据自己设计的电路进行了仿真,达到了预期目标。23516
关键词:微波滤波器  发卡式  X波段  耦合系数
毕业设计说明书(毕业论文)外文摘要
Title   X band hairpin bandpass filter design                       
Abstract
With the rapid progress of technology and the development of wireless communication.The requirement for the communications system is increasing, microwave filters play a decisive role in the communication system, it can be said is the cornerstone of communication system. The performance of the filter can make full use of the frequency resources, better suppress the out of band interference, improving communication service. This paper first introduces the low-pass filter prototype, and then through the frequency transform it into the band-pass filter, and the capacitance and inductance transformed using the formula was defined, and proposes the idea of design for the filter. Then get down to business, "U" - shaped hairpin filter is the basic model, and analyzes the four kinds of electromagnetic coupling characteristic hairpin filter, the coupling coefficient changes with distance and in different ways. Simulation circuit according to their own design, to achieve the expected goal.
Key words: Microwave filter   hairpin   X band    coupling coefficient
目   次
1  绪论    6
1.1  引言    6
1.2  本课题研究意义    6
1.3  本课题研究背景及现状    7
1.4  本文内容安排和研究内容    8
2  带通滤波器设计基本原理    9
2.1  带通滤波器的介绍    9
2.2  低通滤波器原型    9
2.3  频率变换    12
2.4  分布参数带通滤波器的实现    17
2.5  设计滤波器的实验方法    19
2.6  本章小结    20
3  发卡式带通滤波器    20
3.1  发卡式带通滤波器介绍    20
3.2  发卡式滤波器的电磁耦合特性    21
3.3  滤波器各参数初值的计算方法    23
3.4  发卡式滤波器版型    25
3.5  本章小结    25
4  仿真与结果分析    26
4.1  ADS软件简介    26
4.2  X波段发卡式带通滤波器的仿真    27
结  论    29
致  谢    30
参考文献31
1  绪论
1.1  引言
无线通信技术正在日新月异,尤其是微波器件,在通信、医疗、天文学等多个领域中具有广泛的应用。微波滤波器在无线电通讯电路中扮演着至关重要的角色,它在各个接收、发射机系统中起着相当重要的作用。通常来说微波滤波器是用来分离不同的频率信号的一种器件。微波滤波器的主要作用是抑制对需要的信号有干扰的信号,使其不能通过滤波器,并且使需要的信号尽量完整的通过。微波滤波器还可以消除镜频干扰信号、减小噪声信号、频分复用,因此在接收机系统里的微波滤波器可以有效的屏蔽各类对需要的信号进行干扰的信号,又可以降低通带中的差损从而改善接收机的灵敏度。 X波段发卡式带通滤波器设计:http://www.751com.cn/tongxin/lunwen_16614.html
------分隔线----------------------------
推荐内容