毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

榴弹发射器的自动机设计

时间:2017-05-17 21:34来源:毕业论文
包括自动机结构设计、机匣的结构设计、运动诸元分析、开闭锁机构设计、击发机构设计、退壳机构设计、抛壳机构设计、复进机构设计运用SolidWorks绘制三维榴弹发射器的装配体,用

摘要本论文主要完成榴弹发射器的自动机总体设计设计,其中包括自动机结构设计、机匣的结构设计、运动诸元分析、开闭锁机构设计、击发机构设计、退壳机构设计、抛壳机构设计、复进机构设计。其中运用程序与已知参数完成内弹道分析,并计算自动机的运动诸元计算;完成闭锁面及闭锁片的受力分析与有限元分析;击发机构的击发可靠性的分析;抛壳机构分析;枪机复进簧进行设计计算。8778
最终运用SolidWorks绘制三文榴弹发射器的装配体,用AUTOCAD完成重要零件的二文图的绘制。
关键词  榴弹发射器  自动机   结构设计  强度校核  受力分析
毕业设计说明书(论文)外文摘要
Title    The design of  Grenade launcher  automaton
Abstract
This thesis mainly was completed grenade launchers automaton design. Including the cartridge receiver structure design , the  automaton movement analysis,the unblocking mechanism,the blocking mechanism,the cocking menanism,the extraction and ejection menanism,the ejection mechanism and the recoil spring mechanism.In addition, This paper was also completed the ballistic analysis  with some program and the known parameters .Than it was calculated the  automata's movement parameters.Otherwise it was completed the  stress analysis  and  ANSYS  analysis of  blocking's plane and the blocking flakes, reliability analysis of the cocking menanism,structure analysis of ejection menanism and the calculation of the recoil spring mechanism.
Finally using SolidWorks 3 d rendering grenade launcher assembly body,than it was used AUTOCAD to complete the important components of the 2 d drawing.
Keywords   Grenade launchers design   Grenade launchers automaton  Stress Analysis    Strength check    Structure analysis
目   次
1  引言1
1.1  榴弹发射器简介1
1.2  榴弹发射器主要性能特点1
1.3  榴弹发射器发展史2
1.4  榴弹发射器发展趋势2
1.5  软件介绍3
2  30mm榴弹发射器总体方案设计5
2.1  自动机总体结构方案确定5
2.2  30mm榴弹发射器设计的解决途径6
2.3  自动机结构设计6
3  机匣设计10
3.1  机匣机构的主要作用10
3.2  机匣的主要结构作用10
4  枪机运动诸元计算12
4.1  内弹道时期12
4.2  火药气体作用的后效期14
5  击发机构设计与计算15
5.1  击发机构的要求15
5.2  击发机构的结构设计15
6  闭锁机构的设计与计算19
6.1  闭锁机构的作用19
6.2  闭锁机构的设计要求19
6.3  闭锁机构的结构设计19
6.4  闭锁片与闭锁支撑面部分的受力分析与疲劳分析20
7  抽退壳机构设计机构设计25
7.1  退壳机构的作用25
7.2  退壳机构的组成25
7.3  抽壳机构设计25
7.4  退壳机构设计29
8  复进装置的设计与计算30
8.1  复进簧的设计与计算30
结论33
致谢35
参考文献36
 1  引言
1.1  榴弹发射器简介
榴弹发射器是一种大威力、大口径、杀伤面积大的多用途作战轻型武器,分为自动榴弹发射器、半自动榴弹发射器和单发榴弹发射器。发射小型榴弹,现在世界上的主流榴弹发射器所用的榴弹口径大致在20-60mm之间。现有的榴弹发射器大多分为手持式、两脚架式、三脚架式、车载榴弹发射器等,一般手持式榴弹发射器重量轻、体积小,发射特征小且在杀伤性方面威力巨大,外形与步枪相似,发射空间不受约束,近几十年来成为许多局部冲突和特种作战部队的首选武器。而两脚架、三脚架式榴弹发射器一般都作为班组武器出现,杀伤力与杀伤范围要比手持式榴弹发射器大很多。 榴弹发射器的自动机设计:http://www.751com.cn/jixie/lunwen_7234.html
------分隔线----------------------------
推荐内容