毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

应用场协同效应的多孔金属水冷系统研究

时间:2021-01-03 14:27来源:毕业论文
为了使得实验的的结果更加的精确与完善本实验采用电木板和软管材料通过塑料三通,阀门,气动阀元件进行连接。本实验采用对比不同的空隙率的泡沫铜在不同的工况下的的各项指标

摘要采用实验的方法对不同孔隙率的泡沫金属在同种工况下的换热效率与热阻进行对比,首先先查阅资料对实验台的搭建进行了解,再对管路的布置进行了解,最后布置完管路进行实验,为了使得实验的的结果更加的精确与完善本实验采用电木板和软管材料通过塑料三通,阀门,气动阀元件进行连接。本实验采用对比不同的空隙率的泡沫铜在不同的工况下的的各项指标来评价泡沫金属的水冷效果。61804

   最后的实验结果表明:多孔金属压降随流量的变化受孔隙率和孔密度的综和影响,总体呈现出随孔隙率的减小而增加的趋势。

毕业论文关键词:热阻,压降,多孔金属。

Abstract  Adopt the method of experiment with different porosity of foam metal were compared under the same conditions in the thermal efficiency, first to check data for the construction of the test bench to understand, then to know of pipeline layout, finally decorate finish line experiment, in order to the result of experiment is more accurate and perfect this experiment adopts the electric board and hose material by plastic tee, valve, pneumatic valve device to connect. This experiment USES the comparison of different porosity of foam copper under different conditions of the indicators to evaluate bubble water cooling effect of copper.

  Finally the experimental results show that the porous metal pressure drop along with the change of flow influenced by porosity and pore density of heald and, a general trend of increases with the decrease of the porosity.

Keywords: thermal resistance 、pressure drop、metal foam.

目 录

第一章  绪论 1

1.1多孔金属材料的简介与应用 1

1.2研究背景 4

1.3研究目的 9

1.4创新点 9

第二章多孔金属水冷系统研究方案 10

2.1研究目标和研究内容 10

2.2实验台的主要结构 11

2.3泵的选择 14

2.4整个实验系统的搭建 14

2.5系统的测试 17

2.6项目研究的主要技术指标与关键技术......19

第三章研究结果以及分析 21

3.1泡沫铜样品的几何参数 21

3.2 实验结果的研究 21

3.2.1空通道的理论与测量值的比较 21

3.2.2不同泡沫金属样品的热阻性能对比 22

3.2.3不同孔隙率泡沫金属样品的性能对比 23

3.2.4同一孔隙率不同孔密度值的性能对比 24

3.2.5不同样品压降随流量变化对比 25

3.2.6实测结果与国外相关文献的对比 25

3.3总结 26

结语 27

致谢 28

参考文献 29

 第一章  绪论

1.1多孔金属材料的简介与应用

什么是多孔金属:多孔金属就是金属本体是由微小球状体(俗称粉末)经高温烧结而成,金属内部各个方向都布满极微小细孔,故名多孔金属,也叫透气金属或叫多孔透气钢如图1-1所示 应用场协同效应的多孔金属水冷系统研究:http://www.751com.cn/jixie/lunwen_67755.html

------分隔线----------------------------
推荐内容