摘要490型号柴油机汽缸盖是采用HT24-44铸铁材料铸造而成。主要作用是密封气缸上部、构成燃烧室（与气缸壁和活塞顶一起）、构成供给系中进、排系统及冷却系、润滑系的一部分（铸有进、排气道及冷却水套、润滑油道）。本次设计的汽缸盖可以用于固定排灌动力、发动机组和小型载重车上的柴油机上面。由于气缸盖要承受机体及缸盖罩的螺栓压力，燃气压力（主要是机体），承受柴油机工作时产生的高温，所以本次设计要进行螺纹应力计算，缸盖受热分析，以及经过气门通路截面积及尺寸的校核。本论文包括490型柴油机汽缸盖的结构及进、排气门座及气门导管和进、排气门通道、水道、水管等一系列的设计，以及气缸盖的三维建模。52523
毕业论文关键词：490型、气缸盖、设计、管道、尺寸校核、强度校核
Abstract 、490 type diesel engine cylinder head is to use HT24-44 cast iron material. Main role is sealing the upper cylinder and combustion chamber (together with the cylinder wall and piston top), a supply of inlet and exhaust system and cooling system, lubrication system as part of the (casting and cooling water, lubricating oil inlet and exhaust tao). The design of the cylinder cover can be used to power the fixed irrigation and drainage, power unit and small diesel engine on the truck. Due to the cylinder head to the body and cylinder head cover bolts under pressure, the gas pressure (mainly the body), produced by the diesel engine working under high temperature, so the design to be threaded stress calculation, analysis of cylinder head is heated, and after the valve channel cross-sectional area and the size of the check. In this paper, including the 490 type diesel engine cylinder head structure and inlet and exhaust valve seat and valve guide and intake and exhaust door channel, channel, water pipe and so on a series of design, three-dimensional modeling and cylinder head.
Key words:490, Cylinder head, Design, Pipeline, Size check, Strength check
目录
第一章 绪论 1
1.1 选题的背景和意义 1
1.3 490柴油机气缸盖发展趋势 3
第二章 气缸盖的设计 4
2.1气门头部直径、升程和气口尺寸的确定 4
2.2 气门通路面积及气口尺寸校核 6
2.2.1 气门通路面积校核 6
2.2.2气门口尺寸校核 8
2.3 气门座圈的设计 12
2.4气门杆杆径的确定 14
2.5气缸盖结构型式 15
2.5.1 气缸盖型式选择 15
2.5.2 进、排气管道的确定 16
2.5.3 气缸盖的冷却 17
2.5.4 气缸盖的强度 18
第三章 气缸盖的建模 21
3.1 进、排气门的建模 21
3.2 进排气通道的建模 23
3.3 喷油管道的绘制 25
3.4进、排气俩端螺栓座建模 27
3.5 冷却水道的建模 29
3.7 气缸盖上下表面螺栓座以及螺栓孔的建模 490柴油机气缸盖结构设计及实体建模+CAD图纸:http://www.751com.cn/jixie/lunwen_56418.html