毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

非接触气隙隔离DC/DC变换器设计

时间:2018-08-24 17:00来源:毕业论文
结合非接触电能传输和 DC/DC 变换两种技术,制作了一个替代线缆和导电滑环的非接触气隙隔离 DC/DC 变换器。变换器采用了反激式拓扑结构,变压器使用罐形磁芯

摘要 非接触电能传输(CET)是一种新式的电能传输手段,近年来受到越来越多的注意。同传统的利用线缆进行电能传输的方式相较,由于电能的传输过程无需金属导线,规避了用电设备与电源的直接电气连接,使得CET在安全性、可靠性、使用寿命以及文护成本等方面具有很大的优势。   在需要给旋转部件供电的应用中,通常采用带气隙隔离的可分离变压器。本文结合非接触电能传输和 DC/DC 变换两种技术,制作了一个替代线缆和导电滑环的非接触气隙隔离 DC/DC 变换器。变换器采用了反激式拓扑结构,变压器使用罐形磁芯,得到了一个传输数瓦功率的气隙隔离 DC/DC 变换器。文中对变压器和电路的设计均有涉及,最终制作了一个原型机,并对其进行了测试。  27343
毕业论文关键词  非接触电能传输  反激式  可旋转变压器 DC/DC变换器 松耦合Title   Contactless Air gap isolation DC/DC Converter  Abstract   As a new electricity transfer method, contactless energy transfer (CET) has been focused on lately. Compare with traditional transfer ways, CET doesn't need wires and plugs, which avoids direct touch between electrical equipments and the power source, hence it has advantages in safety, reliability, service life, maintenance costs and so on.     In many applications electricity has to be transferred to rotating parts. Usually a detachable  transformer with air gap isolation is used. This paper discusses a rotating power transfer system by means of contactless energy transfer and the DC/DC converter. A  rotating transformer is made as a replacement for wires and slip rings. A flyback topology with an output DC/DC converter has been chosen. A pot core geometry is used for the rotating transformer. And a  rotating contactless power transfer system achieving  several Watts  is presented. Both transformer and electronics designs are presented. A proof-of-concept prototype  has been build and tested to  verify the feasibility of contactless power transmission.   Keywords    Contactless Energy Transfer  Flyback  Rotating Transformer    DC/DC Converter   Loosely Couple
目次
摘要 I
Abstract  .  II
目次..  III
插图和表格清单 VII
1   绪论..  1
1.1   旋转体间的电能传输...  1
1.2   导电滑环存在的问题...  1
1.3   非接触电能传输系统...  1
1.3.1   电感耦合 CET原理  ..  2
1.3.2   旋转运动中变压器线圈结构  3
1.3.3  CET 在中小功率中的应用  ...  3
1.3.4   变换器拓扑结构  4
1.3.5   非接触供电的优势  5
1.4   本文主要的工作...  6
2   变换器原理..  7
2.1   非接触气隙隔离 DC/DC 变换器设计技术要求   7
2.2   开关稳压电源...  7
2.2.1   开关电源的应用与发展  7
2.2.2   开关电源的主要特点  7
2.2.3   开关电源的电路结构  8
2.3   单端反激式变换器...  9
2.3.1   单端反激变换器工作原理  9
2.3.2   单端反激变换器工作模式..  11
2.3.3   控制电路类型..  11
2.4   本章小结.  12
3   变换器变压器  13
3.1   开关电源高频变压器.  13
3.1.1   高频变压器概述..  13
3.1.2   单极性高频变压器..  13
3.1.3   高频变压器电磁参数、结构设计..  16 非接触气隙隔离DC/DC变换器设计:http://www.751com.cn/jixie/lunwen_21811.html
------分隔线----------------------------
推荐内容