毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

Solidworks开式曲柄压力机的参数化设计

时间:2018-07-21 10:13来源:毕业论文
讨论了开式曲柄压力机的曲柄滑块机构和传动系统在KnowleWorker软件中的参数化模块设计。在了解开式曲柄压力机基本设计要求的前提下,在Solidworks软件中建立曲柄滑块机构和传动系统各

摘要文章主要讨论了开式曲柄压力机的曲柄滑块机构和传动系统在KnowleWorker软件中的参数化模块设计。在了解开式曲柄压力机基本设计要求的前提下,在Solidworks软件中建立曲柄滑块机构和传动系统各零件的三文几何模型,采用KnowleWorker软件建立曲轴、连杆、齿轮、带轮、转轴的设计计算模块,提取主要设计参数,并建立参数之间的约束关系,实现参数化CAD几何模型设计。在此基础上,以63吨开式曲柄压力机为例进行参数化设计,在系统中输入相关参数,更新后的设计参数直接传递到Solidworks参数化模型中,生成新的三文几何模型。将以上参数化设计技术应用到工程实践中,可以显著提高工作效率。25984
关键词  开式曲柄压力机  参数化设计  曲柄滑块机构  传动系统
毕业论文设计说明书外文摘要
Title    Parametric Design of Open-type Crank Press      
Abstract
In this paper, we mainly discuss the open-type crank press slider crank mechanism and the transmission system in the KnowleWorker software modular and parametric design. Under the premise of understanding the basic design of the open-type crank press, establishing the 3D geometric model of each part of the slider crank mechanism and transmission system in the SolidWorks software, using KnowleWorker software to establish the crankshaft, connecting rod, gear, belt wheel and rotating shaft design calculation module, extract the main design parameters, and the establishment of a constraint relation between parameters and realize the parametric CAD model design. On that basis, with 63 tons open-type crank press as the design object, the updated design parameters passed directly to the SolidWorks parametric model, generating a new three-dimensional geometric model. The application of parametric design technology to engineering examples can significantly improve the working efficiency.
Keywords  open-type crank press    parametric design    slider crank mechanism    transmission system
目   次
 1  绪论    1
1.1  课题研究背景    1
1.2  曲柄压力机的结构和功能特点    1
1.3  参数化设计技术的发展与现状    2
1.4  参数化设计系统的开发实例    3
1.5  研究内容和技术方案    3
2  曲柄滑块机构的参数化设计    5
2.1  主要计算公式及尺寸约束    5
2.2  曲柄滑块机构主要零件参数化建模    7
3  传动系统的参数化设计    9
3.1  主要计算公式及尺寸约束    9
3.2  传动系统主要零件参数化建模    12
4  参数化设计模块的开发    14
4.1  参数化模块的实现方法和原理    14
4.2  曲柄滑块机构设计计算模块的开发    15
4.3  曲柄滑块机构参数化设计模块的开发    20
4.4  传动系统设计计算模块的开发    21
4.5  传动系统参数化设计模块的开发    27
5  设计案例    31
5.1  主要输入输出参数数值    31
5.2  参数化后的三文模型    34
结论    38
致谢    39
参考文献    40
1    绪论
1.1     课题研究背景
曲柄压力机的工作原理是利用曲柄滑块机构将旋转运动转化为直线往复运动,以此加工成形坯料,其在所有锻压生产设备中所占的比例超过80%[1]。曲柄压力机的显著优点是结构简单、生产效率高,所以在电子设备、汽车制造、仪器生产、日用品等行业被广泛运用。 Solidworks开式曲柄压力机的参数化设计:http://www.751com.cn/jixie/lunwen_20018.html
------分隔线----------------------------
推荐内容