毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

装配式野战电源车风力发电机收展执行机构驱动和控制系统设计

时间:2018-07-18 11:10来源:毕业论文
在分析野战式电源车的功能、组成和工作特点的基础上,结合国内外新型的移动电源车的设计和发展趋势,根据设计要求设计一个用来支撑风力发电机的支腿液压系统

摘要最新的移动电源车系统,已经实现了风、光、柴、储互补。其最大的特点就是具有较强的自持力,在一定条件下能保证系统在没有外部补给的情况下长期为用户提供电力。这种移动电源系统非常适合于在偏远地区为野外作业提供长期电力保障。
本设计在分析野战式电源车的功能、组成和工作特点的基础上,结合国内外新型的移动电源车的设计和发展趋势,根据设计要求设计一个用来支撑风力发电机的支腿液压系统。
本设计主要分为两部分工作,一是风力发电机收展执行机构的结构设计,二是该液压系统的设计,风力发电机转向控制系统设计。本文主要阐述第二部分内容。通过阅读大量国内外文献和参考调研现有的野战式电源车,分析了各种方案的可行性最终确定支腿液压系统方案。25812
关键词  电源车 支腿机构 液压系统
毕业论文设计说明书外文摘要
Title  The field type wind power receive exhibition actuator design                   
Abstract
The latest mobile power vehicle system, Has achieved the wind, light, wood, complement each other. Its biggest characteristic is the strong endurance, Under certain conditions can guarantee system in the absence of external supplies to provide power for a long time.
This design on the analysis of the field type power vehicle functions, composition and characteristics on the basis of the work. Combined with the design of the new type of mobile power vehicle at home and abroad and its development trend , According to the design requirement is designed to support a wind turbine leg of the hydraulic system.
Work this design is mainly pided into two parts, one is wind power receive exhibition structure design of the actuator, the second is the design of hydraulic system, wind generator to control system design. This article mainly expounds the second part of content. By reading a large number of domestic and foreign literature and reference for research of the existing power vehicle field type, analysis the feasibility of various options finalized leg hydraulic system solutions.
Keywords  Power vehicle, leg mechanism, hydraulic system
目  次
1  引言    1
1.1课题研究的意义    1
1.2 国内外发展趋势    1
1.3  本课题移动电源车的主要参数    2
1.4  执行机构的类型    2
1.5  课题研究的主要内容    2
2  液压系统设计计算    4
2.1  支腿液压回路的设计    4
2.1.1   支腿液压回路的作用    4
2.1.2  支腿液压回路的性能要求    4
2.1.3  液压系统原理说明    4
2.2  液压缸工作压力差的计算    6
2.3  液压缸伸缩速度及流量的计算    7
2.3.1  垂直支腿液压缸的伸缩速度及流量计算    7
2.3.2  水平支腿液压缸的伸缩速度及流量计算    7
2.4  液压泵的工作压力及排量的确定    8
2.4.1液压泵额定工作压力的确定    8
2.4.2液压泵流量的计算    8
2.5  液压泵的选择    8
2.6  油箱的基本功能和分类    9
2.6.1  油箱的设计要点    10
2.6.2  油箱容积的确定    10
2.6.3  油箱附件的选取    11
2.7  油管的确定    11
2.8  液压油的选择    13 装配式野战电源车风力发电机收展执行机构驱动和控制系统设计:http://www.751com.cn/jixie/lunwen_19758.html
------分隔线----------------------------
推荐内容