毕业论文

打赏
当前位置: 毕业论文 > 机械论文 >

美国M864底排弹底排装置内弹道计算仿真

时间:2018-07-08 17:48来源:毕业论文
在已知底排药柱的结构情况下分析燃烧面积等因素进而得到完整的燃速方程,进而得到求解压力的内弹道方程组;并通过计算机进行编程得到每一个时间步长下的压力、燃速、质量流量

摘要本文针对底部排气弹的底排装置开展了内弹道特性的计算分析,主要研究结果如下:首先,采用理论分析和数值分析的方法设计并构建了底部排气弹底排装置的内弹道模型,并且研究了旋转和装药参数对底排装置的燃烧特性的影响。25442
其次,在已知底排药柱的结构情况下分析燃烧面积等因素进而得到完整的燃速方程,进而得到求解压力的内弹道方程组;并通过计算机进行编程得到每一个时间步长下的压力、燃速、质量流量等参数。
最后,在得到计算机程序后,研究了在不同转速下的燃烧参数变化规律,并一同分析了当装药参数有变化时,相对应的燃烧参数的变化情况,并得到了和理论研究相对应的结论。
关键词  底排弹  数值分析  内弹道  燃烧特性   
毕业论文设计说明书外文摘要
Title   The interior ballistic numerical analysis of the US M864 base bleed projectile gas generator.                      
Abstract
This essay has carried out the numerical analysis of interior ballistic characteristics based on the base bleed device of the base bleed projectile, the main results were as follows:
First,it adopts the method of theoretical analysis and numerical analysis to design and build the  interior ballistic model of the gas generator of the base bleed projectile,and studies the influence of the spin and change of the propellant on the burn rates of base bleed projectile.
Second,under the condition of already knowing the geometry of the propellant grain,by analysing the burn area and other factors,the whole burning rate equation and interior ballistic equations which is essential to solve the chamber pressure in obtained.also,by computer programming,the parameters such as chamber pressure,burning rate,mass flow under each time step is obtained.
Last,after getting the computer program,analyse the change rule of burn parameters under different spin rates,and together with this,also analyse when propellant parameters changes,corresponding changes of the burn parameters,and get the corresponding conclusions which is consistent with theoretical research.
Keywords  base bleed projectile    numerical analysis   interior ballistic  burn parameters
目   次
1  绪论 1
1.1  研究背景 1
1.2  底排装置 6
1.3  国内外研究现状 7
1.4  本文主要研究内容 12
2  底排弹内弹道模型 13
2.1  引言 13
2.2  内弹道模型的描述  13
2.3  界面设计  20
2.4  程序的主要功能  22
3  数值分析结果 23
3.1  转速条件改变下计算结果 23
3.2  燃速改变下的计算结果 28
3.3  装药参数改变下的计算结果 29
3.4  燃烧面积的比较 35
3.5  和已知文献的数据的比较 36
3.6  本章小结 37
4  总结 38
4.1  全文总结 38
4.2  问题和展望 38
致谢  39
参考文献40
1  绪论
1.1    研究背景
1.1.1    问题的提出
火炮射程是火炮系统重要的战术技术指标。随着现代理论的发展,火炮系统的主要战场作用发生了变化。在60年代,火炮系统要求为:射程远、精度高、威力大、良好的机动性。为了适应信息化战场作战的需要,80年代至今,提出的要求是:在低成本的基础上射程远、反应快、散步低。海湾战争的经验表明,在增大火炮射程的同时,应特别重视射击精度。虽然随着时代的改变,对火炮系统的要求在变化,但是,要求射程始终在第一位。随着现代火炮射击精度的提高,火炮的射程显得更为重要。 美国M864底排弹底排装置内弹道计算仿真:http://www.751com.cn/jixie/lunwen_19242.html
------分隔线----------------------------
推荐内容