毕业论文

打赏
当前位置: 毕业论文 > 计算机论文 >

protel99se智能温室系统设计+电路图

时间:2019-04-27 20:59来源:毕业论文
介绍了智能温室系统的基本原理,该系统主要由参数采集、模数转换、中心控制、数模转换、输出控制及报警装置等模块组成。针对不同环境参数的采集,在选择传感器时采用了现代新

摘  要:本设计介绍了智能温室系统的基本原理,该系统主要由参数采集、模数转换、中心控制、数模转换、输出控制及报警装置等模块组成。针对不同环境参数的采集,在选择传感器时采用了现代新型智能传感器,可以大大提升采集数据时的敏感度。借助protel99se的平台并通过硬件设计实现了对智能温室系统的模拟仿真,可以更加直观地理解该系统设计的原理及功能。经过仿真测试得出的结果,该系统设计能够实现简易的智能温室控制,并且能够满足现代化农业的需求。35003
毕业论文关键词:设计原理;模块功能;智能化;DS18B20
Design of Intelligent Greenhouse System
Abstract: This design introduced the design principle of intelligent greenhouse system design and function, etc. The overall structure of the design include the environment parameter acquisition module, analog-to-digital conversion, central processing, digital-to-analog conversion, output control and alarm device and so on, add up to total five. In the light of different environment factors collection, in the selection of the sensor is a modern type of sensor, the new sensor can greatly advance the performance of the sensor, the sensitivity and more intelligent. In the Protel99se plate based on the hard piece design and implementation of simulation system for Intelligent Greenhouse, it can be more intuitive to understand the principle and function of the system design. To the design, there is a very important practical significance, making the agricultural production of our country a big step, from the beginning of the traditional agriculture to the intelligent agriculture.  Key Words: Principle of design ; Function of module; Intelligent; DS18B20
目    录
摘要    1
引言    1
1.智能温室的前身及现状    2
1.1智能温室的前身——塑料大棚    2
1.2国内外的温室发展趋势    3
1.3研究智能温室的现实意义    4
2.智能温室系统的硬件设计    5
2.1环境参数的监测模块    5
2.2 A/D、D/A转换模块    8
2.3中心控制模块    9
2.4 输出控制模块    10
2.5 报警装置    12
3.智能温室系统的软件设计    13
3.1 主循环程序    13
3.2 子程序    13
4.系统的运行仿真及测试结果    14
4.1 环境参数采集的功能    14
4.2 温室内的控制功能    15
5.结束语    16
参考文献    17
附录    18
致谢    21 
智能温室系统设计
引言
自古以来,人类就已熟知并掌握了农作物春季播种秋季收获的自然生长规律。而在历代都有众所周知的名句,揭示了植物生长速度较快的原因是受到太阳光照等的影响,证明在较早的时候勤劳又聪慧的中国人就已经参透了外界环境因子对作物的生长状况的作用这一道理。
在近代社会,由于人们对农作物的需求量的增大以及对蔬果需求时间的四季性,塑料大棚开始被人们所熟知,塑料大棚也被叫做冷棚,利用钢材,甚至是木条都可以作为基本骨架,并覆盖上塑料薄膜搭建而成,可以说其建造比较简单,也正是因此农民需要投入的资金比较少,并且能够起到栽培各个时节的蔬果花木,根据人类需求控制提早或延迟作物生长的作用,并且显著提高其产量。而随着现实生活的进步,仅仅是塑料大棚已经不再能满足高速运转的现代社会的庞大需求,这也就催生了一种新式的塑料大棚——智能温室。 protel99se智能温室系统设计+电路图:http://www.751com.cn/jisuanji/lunwen_32743.html
------分隔线----------------------------
推荐内容