毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

含能材料粉尘弱点火条件研究

时间:2017-05-21 14:20来源:毕业论文
通过改变化学点火具数量和电阻丝加热时间好改变点火能量,研究在不同点火能量下爆轰管内爆炸压力和爆速变化。实验中,具有平行两个变量,一个是在点火能量一定的情况下改变爆

摘要本文采用高5.7m、内径200mm的大型立式爆轰管测试系统研究含能材料粉尘RDX在化学点火头、电阻丝等弱点火条件下,点火能量和爆炸压力的关系。通过改变化学点火具数量和电阻丝加热时间好改变点火能量,研究在不同点火能量下爆轰管内爆炸压力和爆速变化。实验中,具有平行两个变量,一个是在点火能量一定的情况下改变爆轰管内RDX粉尘的浓度,另一个是粉尘浓度不变的情况下改变点火能量的大小。整个实验就是通过改变这两个实验变量才能得出结论。8949
本文最终得到以下结论:
(1)不管是电阻丝点火还是点火头点火,在点火能量较低的情况下是不能成功点燃的。
(2)点火能越大,爆轰管中的最大压力峰值也就越高。
关键词  RDX  爆轰管 弱点火  点火能  毕业设计说明书(论文)外文摘要
Title Study on Weak Ignition Conditions of Energetic Mmaterials                         
Abstract
Using 5.7m, inside diameter, 200mm large vertical detonation tube test system, the research of energetic materials’ dust in the chemical igniter, the ignition energy size and patterns of resistance wire or spark the weaknesses fire conditions. Good to change the ignition energy of the detonation tube under different ignition energy of explosion pressure and detonation velocity changes by changing the chemical ignition with the quantity and the resistance wire heating time. Experiments, parallel to the two variables, a change in certain circumstances of the ignition energy of the detonation tube within the RDX dust concentration, and the other is to change the size of the ignition energy of dust concentration is the same. Throughout the experiment by changing the two experimental variables in order to reach a conclusion.
This article finally get the following conclusions:
(1) Regardless of the resistance wire ignition or ignition head ignition, ignition energy is low can not be successfully ignited.
(2)  Ignition greater the higher limits on the maximum pressure in the detonation tube.
Keywords:  RDX   detonation tube   weak ignition ignition energy
 目次
1  绪论    1
1.1  研究背景和意义    1
1.2  国内外研究现状    1
1.3  本论文的工作    4
2  粉尘爆炸的特性分析    5
2.1  粉尘爆炸的条件    5
2.2  粉尘爆炸的特点    6
2.3  粉尘的爆炸特性及影响因素    6
2.4  粉尘爆炸强度分级方法    8
2.5  粉尘爆炸泄放面积计算    8
2.6  粉尘爆炸的预防    9
2.7  粉尘爆炸的防护    11
3  实验系统与实验方法    14
3.1  爆轰管所测参数    14
3.2  爆轰管实验装置的组成    15
3.3  实验方法简介    18
4  弱点火条件研究    20
4.1  爆燃和爆轰的区别    20
4.2  电阻丝点火    20
4.3 化学点火具点火    25
4.4  总结        27
结论        29
致谢        30
参考文献    311  绪论
1.1  研究背景和意义
对粉尘爆炸现象的认识,最早可追溯到1795年,在分析一个面粉厂的爆炸事故[1]时,就己经注意到面粉本身发生爆炸的可能性。但是,在以后的相当长的一段时间内,人们对粉尘爆炸的危害和预防认识不够。随着生产力水平及自动化程度的提高,随着生产规模的不断壮大,粉尘爆炸的事故屡有发生。其发生频率和严重程度亦呈上升趋势。尤其在火炸药、冶金、煤炭、石油粮食、化工、塑料、染料、化学纤文、棉麻纤文、医药等行业或部门,往往酿成物毁人亡的恶性事故,造成巨大的经济损失[2]。例如,美国仅1977年就发生21次粮食粉尘爆炸事故,死亡65人,财产损失超过5亿美元。而且仅在这一年12月份的8天内就连续发生了5次大的粉尘爆炸事故,死亡近60人。再如,1987年3月,我国哈尔滨亚麻纺织厂发生了震惊中外的特大粉尘事故,人员伤亡235人,其中死亡58人,重伤66人,损毁厂房1.3万平方米。 含能材料粉尘弱点火条件研究:http://www.751com.cn/huaxue/lunwen_7499.html
------分隔线----------------------------
推荐内容