毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

邻位二钾盐换热器的设计+CAD图纸

时间:2017-05-18 23:31来源:毕业论文
设计一台卧式列管式换热器。根据给定条件进行了热力和阻力设计,结合传热设计计算结果进行结构设计,结构设计中主要是壳体、管箱、封头的设计在加上一些零部件的设计,壳体、

摘要:本次设计为邻位二钾盐的换热器设计,主要任务是设计一台卧式列管式换热器。根据给定条件进行了热力和阻力设计,结合传热设计计算结果进行结构设计,结构设计中主要是壳体、管箱、封头的设计在加上一些零部件的设计,壳体、管箱和封头的设计主要是确定厚度和形式。在零部件的设计中对于管板的设计尤为复杂,考虑到管板是关键的受压元件,对其设计就相当关键,需要对其进行预估算,之后进行校核。然后对其它零部件进行设计,比如法兰的压力容器法兰的设计,也是一个比较复杂的地方,既要考虑到良好的气密性,又要考虑到加工工艺。最后采用ANSYS有限元分析对接管开孔补强进行了应力分析。关键词:管壳式换热器;传热设计;结构设计;有限元分析8882
Design of Ortho Two Potassium Heat Exchanger
Abstract: Ortho two potassium heat exchanger was designed in this paper. The main task is to design a horizontal shell and tube heat exchanger. Under the given conditions and resistance to the thermal design of heat transfer design combined with the structural design calculations, structural design is mainly housing, chamber, head of design with the design of some parts, shell, tube box and head are primarily designed to determine the thickness and form. In the design of components designed for the tube sheet is more complex, taking into account the pressure tube plate is a critical component, its design is quite critical, need to be pre-estimated, after the check. Then the design of other components, such as the pressure vessel flange flange design is a complicated place, we must consider that a good air tightness, and also taking into account processing. Finally using ANSYS finite element analysis carried out over the stress of opening reinforcement.
KeyWords: shell and tube heat exchanger; heat transfer design; structural design; finite element analysis
目  录
1绪论    1
1.1 引言    1
1.2 课题研究的意义    1
1.3 国内外列管式换热器的研究进展与主要成果    1
1.3.1 国内外新型换热器的研究进展    1
1.3.2 列管式换热器的强化传热技术    3
1.3.3 不同结构列管式换热器的比较    4
1.3.4 双壳程换热器的研究现状    5
1.4 课题研究的内容    6
1.5 创新点及难点分析    6
1.5.1 双壳程换热器的设计    6
1.5.2 换热器管板的有限元分析    7
2 换热器的设计计算    8
2.1 热力计算    8
2.1.1 确定物性数据    8
2.1.2 物性参数计算    8
2.1.3 流动空间及流速的测定    9
2.1.4 计算总传热系数    9
2.1.5 换热器核算    12
2.1.6 阻力计算    14
3 结构设计    16
3.1 换热器材料选择    16
3.2 壳体、管箱和封头的设计    16
3.2.1 壳体、管箱的主要型式    16
3.2.2 壳体、管箱壳体和封头壁厚的确定    17
3.2.3 壳体圆筒设计    17
3.2.4 管箱及管箱盖    18
3.2.5 水压试验校核    19
3.2.6 封头设计    20
3.3 管板    21
3.3.1 管板的结构    23
3.3.2 管板与管箱、管子、壳体的连接设计    23
3.3.3 管板厚度计算    26
3.4 换热管设计     35
3.4.1 换热管的规格和尺寸偏差    35
3.4.2 换热管中心距    35 邻位二钾盐换热器的设计+CAD图纸:http://www.751com.cn/huaxue/lunwen_7408.html
------分隔线----------------------------
推荐内容