毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

成型工艺对硝化棉基微孔材料结构的影响

时间:2021-03-12 20:55来源:毕业论文
为了研究孔结构规律,先将含有硝化纤维素的报废军用无烟火药溶解到溶剂中形成高分子溶胶,并经过乳化发泡形成漆状溶液,并在搅拌作用下将漆状乳液分散到非溶剂介质中成球,然

摘要多孔结构含能材料的燃烧特性比普通的密实含能材料的燃烧过程燃烧机制更复杂。其燃烧特性主要取决于燃烧材料的孔结构。孔分布密度与孔径大小分布越有规律,燃烧性能越好。

为了研究孔结构规律,先将含有硝化纤维素的报废军用无烟火药溶解到溶剂中形成高分子溶胶,并经过乳化发泡形成漆状溶液,并在搅拌作用下将漆状乳液分散到非溶剂介质中成球,然后将溶剂驱除,物料分离,烘干后得到内部具有微气孔结构的用作烟花发射和开苞用的药粒。通过控制反应时间,反应温度,以及加水乳化速度来研究孔分布规律。64289

为了更好的观测微孔结构,采用了染色的方法来改善对样品中孔结构的识别效果,在乳化过程中加入染色剂,最后切片观测时,可以更好地研究孔径大小及分布规律。

毕业论文关键词:硝化棉 微孔材料  孔结构 工艺 染色 

毕业设计说明书(论文)外文摘要

Title The effects of molding process on nitrocellulose material With microporous structure

Abstract The combustion characteristics and process combustion mechanism of  energetic materials of the porous structure are more complex than that of the ordinary dense combustion . Its combustion characteristics depend on the pore structure of the burning material. The combustion performance will be better when the density and size distribution of the pore is more regular .

In order to study the regularity of pore structure,the first step is that scrapped military smokeless powder containing nitrocellulose is dissolved into a solvent to form a polymer sol. The second step is to emulsify the sol with water into a paint-like solution.Then disperse the solution under stirring into a non-solvency to mold the shape of the ball. Next, drive the solvent,separate the material,oven dry to grains with abundant micropores inside . Study on the law of the pore size distribution by controlling the reaction time, reaction temperature, and the speed of the water added.

To observe the structure of the microporous, a new method --- dyeing is tried in the present study. The coloring agents is added in the emulsifying process, when the slice is observed,the laws of the pore size and distribution can be better studied.

Keywords: nitrocellulose, emulsify, temperature, speed, time, dyeing

1   绪论2

1.1  选题的目的及研究意义2

1.2  国内外进展及研究现状2

1.3  硝化棉基微孔材料的发展趋势及展望4

1.4  拟开展的工作4

2   成型工艺研究5

2.1  成型工艺基础5

2.1.1 球形药成型原理及过程分析5

2.1.2 影响球形药质量的因素5

2.2  工艺流程图6

2.3  成型工艺方案7

2.3.1 成型工艺装置图7

2.3.2 成型工艺具体步骤8

2.4   孔结构测试与表征11

2.4.1 孔表面截取11

2.4.2 孔表面观测与孔径获取12

2.4.3 孔径数据处理与分析13

3     结果与讨论14

3.1   实验结果14

3.1.1 孔结构表征方法的改进15

3.1.2 染色剂的选用对比试验16

3.1.3 染色剂的浓度选用17

3.1.4 染色过程的实施17

3.1.5 染色过程的取样17

3.1.6 乳化时间对硝化棉基微孔结构的影响18

3.1.7 分散时间对硝化棉基微孔结构的影响23

3.2 讨论25

结论 26

1 主要结论26

2 尚未解决的问题26

致谢  28参考文献29

1  绪论

1.1选题的目的及研究意义

随着科技的日新月异,新材料也在不断地出现,微孔材料就是其中之一。按照国际纯粹与化学协会(IUPAC)的定义,把孔道的尺寸在2nm以下的物质称为微孔,具有规则微孔孔道结构物质称为微孔化合物;孔道尺寸在2一50nm的物质称为介孔,具有有序介孔孔道结构的物质称为介孔材料。多孔结构含能材料的燃烧特性比普通的密实含能材料的燃烧过程燃烧机制更复杂,其燃烧特性主要取决于材料的孔结构。本课题拟在前期相关研究基础上,开展微孔结构含能材料孔结构控制方法研究,为有效控制和利用其特殊的燃烧性能奠定基础。论文网 成型工艺对硝化棉基微孔材料结构的影响:http://www.751com.cn/huaxue/lunwen_71373.html

------分隔线----------------------------
推荐内容