毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

纳米材料在硝化棉体系中分散性研究

时间:2018-07-29 15:38来源:毕业论文
毕业设计说明书中文摘要本文采用硝化纤维素作为基体,在其中加入黑索今、氧化石墨烯等材料,制成七孔发射药,对制成的发射药表面、内部用扫描电镜表征分析,对样品用密闭爆发

毕业设计说明书中文摘要本文采用硝化纤文素作为基体,在其中加入黑索今、氧化石墨烯等材料,制成七孔发射药,对制成的发射药表面、内部用扫描电镜表征分析,对样品用密闭爆发器进行密爆试验,最后对密爆试验残渣进行扫描电镜表征分析。结果发现,在制备七孔圆形发射药过程中缓慢滴加亚微米黑索今分散液、氧化石墨烯分散液的做法可以有效防止亚微米黑索今、氧化石墨烯的团聚现象;黑索今加入后,发射药点火会变得相对困难,但是对燃烧速度没有影响;氧化石墨烯加入后,发射药点火不会发生变化,但是燃烧速度有所下降;质量较大的发射药燃烧时间反而短,燃烧速度更快;质量较大的发射药样品密爆后残渣中内部孔径较质量小的发射药密爆残渣大,这也从另一个方面证实了质量较大的发射药密爆时燃烧速度更快。26408
关键词  硝化纤文素  黑索今  氧化石墨烯  密闭爆发器  扫描电镜
毕业论文设计说明书外文摘要
Title    Dispersion of Nanomaterial in Nitrocellulose            
  Abstract
The propellants in this work are prepared with Nitrocellulose as its matrix, RDX and graphene oxide as its additives. The propellant is burned in a manometric bomb. The SEM (scanning electron microscope) is used to characterize the exterior and internal structure of the prepared propellant and the residue of the propellant after burning. Adding submicron RDX soliquoid and graphene oxide soliquoid slowly while preparing the propellants can effectively prevent the agglomeration of them. After adding RDX, the propellants is not ignited easily as that without RDX, but the burning velocity remains; after adding graphene oxide, the propellants is ignited as easily as that without RDX, but the burning velocity declines;the propellant which has a larger amount burns more quickly ,and with less time; the more the propellant, the larger the internal space will be, which is another evidence of the conclusion that the propellant which has a larger amount burns more quickly.
Keywords  Nitrocellulose  RDX  Graphene oxide   Manometric bomb   SEM
目   次
1  引言  1
1.1  硝化纤文素  1
1.2  纳米材料 … 1
1.3  氧化石墨烯  2
1.4  黑索今  3
2  实验部分  6
2.1  亚微米黑索今、黑索今硝化纤文素复合材料制备  6
2.2  氧化石墨烯分散液的制备  8
2.3. 氧化石墨烯、黑索今硝化纤文素复合材料制备 … 9
2.4  发射药扫描电镜表征 11
2.5  密闭爆发器试验 11
2.6  残渣的扫描电镜表征 11
3  结果分析与讨论… 12
3.1  发射药扫描电镜表征分析 12
3.2  密闭爆发器试验数据分析 15
3.3  密爆残渣扫描电镜分析… 20
3.4  本章小结… 25
结论 … 26
致谢 … 27
参考文献 … 28
1  引言
1.1  硝化纤文素
硝化纤文素又称纤文素硝酸酯,是纤文素与硝酸发生酯化反应产物。在中国,棉纤文素是制备硝化纤文素的原料中纤文素的主要来源,因此又习惯称之为硝化棉。硝化纤文素分子式可写成[C6H7O2(OH)3-x(ONO2)x]n,其分子结构见图1.1。其中x代表硝化纤文素的取代度(酯化度),x值不同,则硝化纤文素各种性质不同,应用领域也不尽相同。其中取代度最高的称为强棉(火棉),用于发射药制造[1]。
Brodman B W等[2]用硝化纤文素包裹黑索今,使硝化纤文素分子链与黑索今分子间形成氢键,以此达到改善发射药力学性能的目的。这也是本文所采用的方法。刘小刚等[3]则对硝化纤文素包裹黑索今方法加以改进,在包覆的过程中加入了表面活性剂,再对得到的包覆球进行粒度分析,发现粒度分布基本服从对数正态分布;又对包覆球进行了力学性能测试,发现加入了表面活性剂后,包覆球的品质及力学性能均有明显提升。 纳米材料在硝化棉体系中分散性研究:http://www.751com.cn/huaxue/lunwen_20589.html
------分隔线----------------------------
推荐内容