毕业论文

打赏
当前位置: 毕业论文 > 化学论文 >

氧化物对LiFePO4的影响研究

时间:2018-03-29 09:54来源:毕业论文
水热法制备LiFePO4时,反映温度、反应时间,掺杂氧化物对所得LiFePO4材料晶体结构、外观形貌和电化学性能的影响。Li离子氧化还原峰越明显,对称性越好,样品才会具有更优异的可逆性能

摘要LiFePO4是一种锂离子电池正极材料,在自然界是以磷铁锂矿形式存在,其结构稳定、资源丰富、安全性能好并且无毒。随着科学技术的发展,尤其是化学电源技术的快速发展,人们对电池材料提出了更高的要求。本课题研究的是掺杂氧化物对LiFePO4的影响。系统研究水热法制备LiFePO4时,反映温度、反应时间,掺杂氧化物对所得LiFePO4材料晶体结构、外观形貌和电化学性能的影响。Li离子氧化还原峰越明显,对称性越好,样品才会具有更优异的可逆性能。Li离子的氧化还原电位差是随着扫描速度增大而慢慢变大的,而在较大扫描速度下,结构可能已经发生破坏,锂离子不能正常嵌入/脱出,造成电化学性能变差。20340
毕业论文关键词: 磷酸铁锂;氧化物;掺杂;水热法
The influence of the oxide of  LiFePO4 research
Abstract
LiFePO4 is a lithium ion battery cathode material, exists in the form of phosphate lithium iron ore in nature, the structure stability, rich resources, good safety performance and non-toxic. With the development of science and technology, especially the rapid development of chemical power source technology, people put forward higher request of battery material. This topic research is the effect of doping oxides of LiFePO4. Hydrothermal preparation of LiFePO4 system research, reflect the temperature, reaction time, doping oxides on the LiFePO4; Materials, the influence of crystal structure, morphology and electrochemical performance of appearance. Lithium ion redox peak, the more obvious, the better the symmetry, reversible samples will have excellent performance. Lithium ion redox potential difference is as the scanning speed and slowly become bigger, and in the scanning speed, the larger structures may damage have occurred, lithium ion embedded out properly, causing electrochemical performance variation.
Key words:LiFePO4;Oxide;Doping;Hydrothermal method
目 录
第1章 绪论    1
1.1 锂离子电池正极材料的研究现状    1
1.2 LiFePO4的结构    1
1.3 LiFePO4的电化学反应机理    2
1.4 LiFePO4容量衰减的原因    4
1.5 LiFePO4作为正极材料的优点与缺点    5
1.5.1 LiFePO4的优点    5
1.5.2 LiFePO4的缺点    6
1.6 LiFePO4的合成方法    7
1.6.1  液相合成法    7
1.6.2  高温固相法    7
1.6.3  微波法合成    7
1.6.4  其它合成方法    8
1.7 材料的表征方法    8
1.7.1  X射线粉末衍射(XRD)    8
1.7.2  扫描电镜(SEM)    8
1.7.3  透射电镜(TEM)    8
1.7.4  循环伏安(CV)    9
1.8 选题的目的与研究内容    9
1.8.1  选题的目的    9
1.8.2  本文的研究内容    9
第2章 实验内容与方法    10
2.1实验材料与设备    10
2.1.1  实验材料    10
2.1.2  实验设备    11
2.2 实验过程    13
2.2.1 样品1的制备过程    13
2.2.2 样品2的制备过程    13
2.2.3 样品3的制备过程    13
2.2.4 样品4的制备过程    13
第3章 实验结果与分析    15
3.1 X射线衍射图谱分析    15
3.2 循环伏安图谱分析    19
3.3 交流阻抗图谱分析    24
第4 章 结论与展望    29
致 谢    31 氧化物对LiFePO4的影响研究:http://www.751com.cn/huaxue/lunwen_12083.html
------分隔线----------------------------
推荐内容