毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

某小区钻孔灌注桩加锚杆的基坑支护结构设计+CAD图纸

时间:2020-06-20 09:43来源:毕业论文
采用钻孔灌注桩加锚杆的基坑支护结构。在本次设计中先对钻孔灌注桩加锚杆的支护形式进行了手算,后用理正软件进行了电算校核。在最后将附上基坑周围环境图、基坑支护平面图、

摘要随着我国经济的发展,城市化的高速前进,高层建筑、地下工程建设越来越多,基坑工程也就越来越多。为了保证地下结构施工以及基坑周边环境的安全,需要对基坑侧壁进行支护、加固等保护措施。

拟建工程是位于禹山东路西侧、御带河东侧的御带河27#—33#楼地下室基坑围护。该工程±0.00相当于黄海标高6.60m,高层建筑筏基板面标高-7.800m,筏基厚0.4m,基坑挖深为8.3m,基坑面积约22000平米,围护总长度约680米。

本着安全可靠、经济合理、技术可行、施工方便的原则,本次设计中采用钻孔灌注桩加锚杆的基坑支护结构。在本次设计中先对钻孔灌注桩加锚杆的支护形式进行了手算,后用理正软件进行了电算校核。在最后将附上基坑周围环境图、基坑支护平面图、剖面图、大样图和设计与施工说明图。51233

毕业论文关键词:深基坑;基坑支护;钻孔灌注桩;锚杆

Abstract With the development of our national economy,rapid development of the city ,high-rise buildings,underground construction more and more,the foundation pit engineering becomes more and more.In order to guarantee the construction of underground structure and security environment around foundation pit wall,the need for support,reinforcement and protection measures.  

The project is located in Yu Shan Road on the west side of the east side, with royal royal with river 27# - 33# building basement foundation pit. The project is equivalent to 0 of the Yellow Sea elevation 6.60m, the raft board elevation of -7.800m high-rise building,raft thickness 0.4m, deep foundation pit 8.3m, pit area of about 22000 square meters, a total length of about 680 meters of enclosure. 

In a safe and reliable, economical and reasonable, feasible, convenient construction principle, the design of the anchor pile retaining structure of foundation pit. In this design the first hand count of bored pile and anchor bolt support form, with the software of computer check. In the end will attach the pit surrounding environment map, excavation plan, profile, drawing.

Keywords: deep foundation pit; retaining and protecting for foundation excavation;Cast-in-place pile;anchor pile

目录

第一章 绪论 1

1.1引言 1

1.2基坑支护类型 1

1.3基坑支护的设计要求 3

1.4基坑工程发展现状 4

1.5深基坑支护技术的发展趋势 4

第二章 基坑基本概况 6

2.1 基坑工程概况 6

2.1.1工程概况 6

2.1.2基坑概况 6

2.1.3基坑周围环境 6

2.2工程地质概况 7

第三章 基坑支护方案 9

3.1设计依据 9

3.2方案选择 9

第四章 基坑支护设计计算 12

4.1基坑支护设计参数说明 12

4.1.1地质计算参数 12

4.1.2计算区段的划分 12

4.1.3超载q取值 12

4.2支护结构土压力计算 12

4.2.1土压力系数计算 12

4.2.2 AB、FGHA段支护结构设计计算 某小区钻孔灌注桩加锚杆的基坑支护结构设计+CAD图纸:http://www.751com.cn/gongcheng/lunwen_54793.html

------分隔线----------------------------
推荐内容