毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

重庆市某县人民医院空调系统设计

时间:2019-02-19 21:12来源:毕业论文
县人民医院建筑。建筑包括B和C两个区,没有地下层。B区为两层,C区为五层。B区和C区楼高分别为26.4米和10.2米。该建筑有药房、诊室、商店、医生办公室、会议室、彩超室等

摘要本毕业设计的建筑在重庆市,是一所县人民医院建筑。建筑包括B和C两个区,没有地下层。B区为两层,C区为五层。B区和C区楼高分别为26.4米和10.2米。该建筑有药房、诊室、商店、医生办公室、会议室、彩超室等。本建筑的设计包括建筑的空调设计、通风设计和排烟设计。选择了新风加风机盘管系统,B区和C区一层门诊大厅用了吊顶机。本设计完成了建筑所有房间的负荷的计算、各类系统的选择、设备的选型、空调的水系统、新风系统、排风和排烟系统的设计,还有系统整体的设计和整个设计的图纸绘制等。 结果,绘制得到了本建筑的暖通空调设计的图纸总共13张和一份设计计算说明书。33382
关键词  暖通空调  负荷  排风   空调
毕业论文设计说明书外文摘要
Title    The HVAC design for Chong Qing hospital         
Abstract
  The architecture of this graduation is in Chongqing City,Is a county people's Hospital Building。Construction includes B and C two zones,No underground layer。B area is two layers,C area is five layers。B district and C district are 26.4 meters high and 10.2 meters respectively。The building has pharmacies, consulting room, shops, doctors office, conference room, color ultrasonic room, etc.The design of this building includes the air conditioning design, ventilation design and smoke exhaust design of the building。Select the fresh air fan coil system,B district and C district a layer of outpatient hall with a suspended ceiling machine。This design has completed the calculation of the load of the building room,The choice of all kinds of systems, equipment selection, air conditioning system, air system, exhaust and smoke exhaust system design, as well as the overall system design and design drawings, etc.As a result, the total of 17 sheets of HVAC design drawings and a design calculation manual were drawn。
Keywords  HVAC  load  exhaust  the air conditioning
目录
1  绪论  1
1.1  工程概况  1
1.2  设计要求  1
1.3  数据和设计依据  1
2  负荷计算  1
2.1  夏季负荷计算 2
2.2  冬季负荷计算  8
3  空调系统选择 9
4  设备选型  9
4.1  冷水机组选型  9
4.2  锅炉选型 10
4.3  水泵选型 10
4.4  冷却塔选型 11
4.5  补水箱选型 11
4.6  集分水器选型 12
4.7  风机盘管选型  12
4.8  新风机组选型 13
5  空调水系统设计 14
5.1  冷冻水系统设计 14
5.2  冷却水系统设计 17
6  空调风系统设计 17
  6.1  空调送风系统设计 17
6.2  排风系统设计  17
7  排烟系统设计 18
7.1  自然排烟 18
7.2  机械排烟 18
结论 19
致谢20
参考文献 21
1  绪论
1.1  工程概况
    本工程为重庆市某县人民医院,总占地面积为4000m2,总建筑面积约35000m2,建筑地下一层,主体A区十五层,裙楼B区和C区分别为二层和五层,高72m。本工程裙楼B区和C区总建筑面积约为10000m2,建筑功能分区为:B区一楼主要为挂号大厅;B区二楼主要为商店、办公用房等;C区一楼至四楼主要为各科诊室;C区五楼主要为各种会议室;
1.2  设计要求
空调系统的设计除了要满足不一样的各种要求外,还需要考虑满足房间不同分割的要求,设计中需要考虑能量的合理利用和运行需要的费用要节约。
1.3  数据和设计依据
1)室外的设计参数 重庆市某县人民医院空调系统设计:http://www.751com.cn/gongcheng/lunwen_30423.html
------分隔线----------------------------
推荐内容