毕业论文

打赏
当前位置: 毕业论文 > 土木工程 >

石家庄市某行政办公大楼暖通空调工程设计

时间:2018-11-13 21:41来源:毕业论文
选择了利用地下水作为冷热源,地源热泵机组来提供整栋建筑所需的冷量和热量。设计中使用了天正软件计算和典型房间手工计算的方法计算冷热负荷,采用全空气系统与风机盘管加独

摘要本次设计对象为河北省石家庄市某综合行政办公楼。石家庄位于华北平原,属于寒冷地区,结合行政办公楼的特点,为其设计暖通中央空调系统。本建筑物共十层,其中包含门厅、办公大厅、办税大厅,办公室、健身房、会议室、多功能厅和阶梯教室等多种功能性房间。设计结合石家庄实际情况,考虑到政策引导,选择了利用地下水作为冷热源,地源热泵机组来提供整栋建筑所需的冷量和热量。设计中使用了天正软件计算和典型房间手工计算的方法计算冷热负荷,采用全空气系统与风机盘管加独立新风相结合的设计,并对地下车库进行了诱导风机的通风和防排烟设计。本次设计以保证舒适性为基础,使用绿色能源,尽可能降低能耗,作为政府办公楼,引导行业方向。30169
关键词  地下水  地源热泵  诱导风机  绿色能源 
毕业论文设计说明书外文摘要
Title   ________________ Design of HVAC System _______________________
 for an Administrative Building in Shijiazhuang       
Abstract
The design object is an administrative office building in Shijiazhuang, Hebei province. Shijiazhuang is located in the North China Plain, which belongs to the cold regions, and the characteristics of the administrative office buildings must be taken into consideration to design the HVAC central air-conditioning system. The building has ten storeys and a variety of function rooms, such as halls, office halls, the tax service hall, office rooms, a gym, meeting rooms, a multi-function hall and a lecture halls. The design take an eye on the actual situation in Shijiazhuang, also take the policy guidance into account, chose the use of groundwater as a cold heat source, ground source heat pump(GSHP) to provide the whole building required for cold quantity and heat. The design uses T-hvac software and manual work to calculate the heat load calculation, design by combining all air system with fan coil plus fresh air, and the underground garage of induced fan of ventilating and smoke exhaust design. The design is based on the comfort, using green energy, as far as possible to reduce energy consumption. As the government office, it need to guide the industry direction.
Keywords  groundwater  GSHP  Induced fan   green energy resources
目   次
1    工程概况与设计参数 1
1.1  工程概况 1
1.2  设计参数 1
1.3  设计内容 2
1.4  设计依据  3
2    空调负荷计算 4
2.1  夏季冷负荷计算4
2.2  冬季热负荷计算6
3    冷热源系统设计12
3.1  冷热源方案选择12
3.2  机组的选型计算 12
3.3  水系统设计计算13
4    空调系统设计17
4.1  系统方案设计17
4.2  全空气系统设计计算17
4.3  风机盘管的计算选型20
4.4  气流组织计算21
5    主楼防火及防排烟系统设计 22
5.1  地上部分的自然排烟系统22
5.2  地上部分防烟系统设计22
6     地下停车场通风系统设计24
6.1  通风、排烟系统方案论述24
6.2  通风、排烟系统方案论述24
6.3  诱导风机的布置与选型25
结论27
致谢28
参考文献29
附录A  负荷计算表 30
1  工程概况与设计参数
1.1  工程概况
该建筑为河北省石家庄市一地下1层、地上10层的行政办公大楼,总建筑面积约10000m2,空调面积约7000m2。该建筑的地下室为停车库和相关的设备用房,地上一层为办公大厅、门厅、票据管理等功能用房,地上二层为档案室、会议室及办公用房,地上3~10层为办公、管理、仓库、阶梯教室等用房。 石家庄市某行政办公大楼暖通空调工程设计:http://www.751com.cn/gongcheng/lunwen_25751.html
------分隔线----------------------------
推荐内容