毕业论文

打赏
当前位置: 毕业论文 > 外文文献翻译 >

柴油喷嘴雾化英文文献和翻译(5)

时间:2016-12-17 23:39来源:毕业论文
the spray formed by diesel nozzles and the defini- tions of the coordinate system in the spray flow field. The same direction as the nozzle axis was defined as Z, and the radial direction was defined


the  spray  formed  by  diesel  nozzles  and  the  defini-
tions  of  the  coordinate  system  in  the  spray  flow
field.  The  same  direction  as  the  nozzle  axis  was
defined  as  Z,  and  the  radial  direction  was  defined
as  R.  The  origin  was  located  at  the  nozzle  tip.
The  measurement  was  performed  at  the  non-
dimensional  axial  positions  of  Z/dn=31,  63,  94, 1696  Jeekuen Lee, Shinjae  Kang and Byungjoon Rho
156,  219,  281,  375,  469,  and  562  far  from  the
nozzle  tip.  The  measurement points  at  the  radial
direction  were  densely  set  near  the  axis  because
the  droplet  size of the  spray  varies  sharply. How-
ever,  their  intervals became  larger  near  the  outer
region  of  the  spray.  The  number of points  at  the
radial  distance was  15.  The  number of measured
data  at  each  measurement point  was  20,000,  and
the measurement mode was  set  not  to  exceed  300
see.
3.  Results  and  Discussion
3.1  Time-resolved  evolution  of  droplet  size
Figure  4  shows  the  time-resolved  evolution of
the  droplet  diameter,  the  AMD  and  the  SMD  at
the  axial  position  of Z/d,=94  and  at  the  center-
line  of  the  spray  for  the  5-hole  and  the  single-
250  150
Diameter  I  : Leading edge
......... AMD  II : Central part
200  SMD  IIh Trailing edge,
i  End of
!~  ./njection
Start of  i~
injection  ~  --"":"~  "':
-0.5  O  0.5  1  1.5  2  2.5
Time from start of injection  (ms)
(a)  5-hole nozzle  (Z/d~=94, R/d,=0)
250  r
150
~100
E
200
~  150
i,,.
100
50
11317
P
50  t~
~g
o3
150
t  •  Diameter  I  :  Leading edge  ]
......... AMD  I1: Centralpart  .I
SMC)  II1:  Trailing edge  /
i~u~-.,  i...',  lO
ii   .
~,  i  .  50
|inJection"  "  "  ~'5"_".'.'a;':  "~"  ~"  "  .L.--  :.-:  .------- ...............  .  ~0
!  I
o ~-'"~  /";..,~-':-:u.~.  _  _.
I  .....  I
-0.5  0  0.5  1  1.5  2  2.5  3
Time from start of injection  (ms)
(b)  Single-hole nozzle  (Z/dn=94, R/dn=0)
Fig.  4
100
I:1
O
v
Time-resolved evolution of droplet diameter,
AMD and SMD at axial position of Z/dn=94
and  at  centerline  of  spray  for  5-hole  and
single-hole nozzle
hole  nozzle. Time window, which  is  a  time  inter-
val  for  calculating the mean droplet  sizes  such  as
AMD  and  SMD,  was  0.15 ms.  It  was  carefully 柴油喷嘴雾化英文文献和翻译(5):http://www.751com.cn/fanyi/lunwen_1165.html
------分隔线----------------------------
推荐内容