[6] Resultaten van de prijsvraag, Stille duurzame voegovergangen; July 2012。
[7] UK Bridge joint association, Standard for asphaltic plug joints, Document Ref: BJA/S2/APJ; May 2003。
[8] India Ministry of Road Transport and Highways, Revised interim specifications for expansion joints, No。 RW/NH-3059/1/96-S&R; November 2000。
[9] Bramel BK, Dolan CW, Puckett JA, Ksaibati K。 Asphalt plug joints: refined material tests and design guidelines。 J Transp Res Board 2000;1740:126–34。
[10] ASTM。 Standard specification for asphaltic plug joints for bridges。 D6297, West Conshohocken, PA; 2001。
[11] Bramel BK, Dolan CW, Puckett JA, Ksaibati K。 Asphalt plug joints: characterization and specification。 Department of Civil and Architectural Engineering, University of Wyoming; May 1999。
[12] Johnson G。 Bridge deck joint systems performance and maintenance。 IN: IBTTA maintenance Fall Conference, Tampa, FL; October 2005。
[13] Park P, EI-Tavil S, Park SY, Antoine E。 Behaviour of bridge asphalt plug joints under thermal and traffic loads。 J Bridge Eng 2012;15(3):250–9。
[14] Partl MN, Hean S。 Experience with testing and performance evaluation of bituminous plug expansion joints on concrete road bridges。 Int J Roads Airports 2011;1:1–17。
[15] Qian ZQ, Akisanya AR, Imbabi MS。 Edge effects in the failure of elastic/ viscoelastic joints subjected to surface tractions。 Int J Solids Struct 2000;37(41):5973–94。
[16] Qian ZQ, Akisanya AR, Imbabi MS。 Effects of geometry on the deformation of asphaltic plug joints subjected to surface tractions。 J Strain Anal Eng Des 2000;35(5):403–13。
[17] Park P, El-Tawil S, Park SY。 Improved geometric design of bridge asphalt plug joints。 J Bridge Eng 2011;16(1):158–65。
[18] Reid MD, Imbabi MS, Coutelier D。 Effects of joint geometry on response of asphaltic plug joints。 J Transport Eng 1998;124(4):311–8。
[19] Hean S, Partl MN。 Performance of two new asphaltic plug joint systems for large movements。 In: TRB 2005 Annual Meeting CD-ROM; 2005。
[20] Partl MN, Hean S, Poulikakos L。 Asphaltic plug joint characterization and performance evaluation。 In: Proceedings of 9th international conference on asphalt pavements, ISAP, Copenhagen, 17–22 August, 2002。
[21] Partl MN, Hean S。 Mechanical performance testing of low-noise bituminous plug expansion joints for concrete road-bridges。 In: Proceedings of international symposium of advanced technologies in asphalt pavements, Korea; 2010。
[22] Hean S, Partl MN。 Low temperature behaviour research of innovative joints by means of movement simulator tests。 Final report, EMPA No。 452822; December 2009。
[23] Huurman M, Moraal J。 LINTRACK research into long-term joint behaviour: summarising end report。 Report No。 7-10-202-7, Section of Road and Railway Engineering, Delft University of Technology; January 2010。
114 L。 Mo et al。 / Construction and Building Materials 45 (2013) 106–114
[24] Huurman M, Moraal J。 LINTRACK research into expansion joint behaviour: test set-up, protocol and measurement plan。 Report No。 7-08-202-2, Section of Road and Railway Engineering, Delft University of Technology; Septemper 2009。
[25] Lima AJ, De Brito J。 Road bridge expansion joints: existing systems and most common defects。 In: Proceedings of the 3rd international conference on bridge maintenance, safety and management – bridge maintenance, safety, management, life-cycle performance and cost; 2006。 p。 233–4。
[26] ASTRA guideline。 Fahrbahnübergänge aus Polymerbitumen。 Eidgenössisches Departement für Umwelt, Verkehr und Kommunikation, Bundesamt frü Strassen, ASTRA, Art。 Nr。 806。315d, Switzerland; 2005。 沥青填充式伸缩缝英文文献和中文翻译(16):http://www.751com.cn/fanyi/lunwen_77385.html